T/MonXM 4.7 User Manual

UM-TMN-470

Section Five - Configuring Remote Access

5-5

D-SK-159-10A-00

Create a data connection for the Remote Access Server using the fol-

lowing steps:

a. Press F6 to open the Data Connection Assignment screen.

b. Press F1 to open the Ethernet TCP Port Definition screen.

c. Select an used entry and press Tab to open the list box for port

type.

d. Select TCP from the list box, and enter a port number and

description. In the example shown in Figure 5.4, the port number

is 3000 and the description is “RAS Socket.”

e. Press F8 to save the configuration.

Fig. 5.4 - TCP Port for Remote Access Server

Step Two

f. At the Data Connection Assignment screen, select the TCP Port

you just created. Any user that wants to connect to the T/MonXM

system will use this port.

Fig. 5.5 - Data connection for Remote Access Server

Note:

TCP Port 3000 is

the DPS-suggested

default.