T/MonXM 4.7 User Manual

UM-TMN-470

Section Five - Configuring Remote Access

5-7

D-SK-159-10A-00

Next, initialize the system, and enter Monitor Mode.

a. Exit to the Master menu.

b. Choose Initialize.

c. Choose Monitor

The last step is to configure your T/Windows or T/RemoteW software

to use the Remote Access Server.

a. Run the T/Windows or T/RemoteW software.

b. From the Settings menu, choose Communications to configure

the T/Remote communication settings. To configure T/Windows

communication settings choose Settings from the Option menu.

c. Enter the IP address of the T/MonXM system and the TCP port

assigned to the Remote Access Server in T/MonXM. (See Step

2d on page 5-5. Refer to Figure 5.8 for T/Remote and Figure 5.9

for T/Windows.

d. Click OK to save your settings.

Step Four

Step Five

Fig. 5.8 - T/RemoteW communications settings