Discrete Sensors

TempAlert Sensor (30 to 100 degrees F)
D-PR-589-10A-00
Discrete temperature sensor with high and low alarm thresholds Separate alarms for high and low temperatures. Temperature range from 30 to 100 F. (-1.1 to 37.8 degrees C). Requires no power to operate. Wall mount rectangular box design. Includes screw kit for mounting hardware.

Meter Type TempAlert Sensor
(-30 to 130 degrees F)
D-PR-492-10A-00
Discrete temperature sensor with high and low alarm thresholds. Separate alarms for high and low temperatures. Temperature range from -30 to 130 degrees F. (-34.4 to 54.4 degrees C). Requires no power to operate. Not for use in freezers.

Humidity Sensor (Discrete)
D-PR-579-10A-00
Monitors a humidity range of 20% to 80% relative humidity. One alarm threshold that can be used as either a high or low humidity alarm. Great for monitoring humidity in computer rooms, COs, cell sites, nodes, and CEVs.

Interior/Exterior Motion Sensor (Discrete)
D-PK-SENSR-12008.00001
Water-resistant motion sensor with Advanced ASIC Technology. Focuses on intruders and ignores cats, mice, birds & insects for virtually no fales alarms. Ideal for triggering DPS SiteMON IP camera. Detection method: Uses 2 matching dual optics (passive infrared).

Motion Sensor (Discrete)
D-PR-599-10A-00
Monitors motion within a user-specified field of vision. Detection range from 3m-6m. Powered by 12 to 28 VDC. At sites with 110 VAC power, a +24 VDC wall-transformer is available (D-PR-105-10A-03). Can also be integrated with the Building Access System (BAS) to provide automatic exit tracking and intrusion notifications.

Push-to-Exit button
D-PK-SENSR-12007.00001
Push to exit button that may be illuminated by providing 12V. Momentary switch that mounts in a wall switch receptacle (2 1/2" deep). Ideal for use with the Entry Control Unit (ECU) to provide a signal to release the door latch for an authorized exit.

Discrete Liquid Level Sensor
D-PK-SENSR-12003.00001
Provides a discrete contact closure when liquid levels fall below parameters. Contains a dry reed switch encapsulated within a stem. Supports N/O and N/C alarm contacts. Operates at a maximum temperature of 105 C and a maximum pressure of 150 PSI.

Power Out Alert Sensor (Discrete)
D-PR-592-10A-00
Plugs into any 110 VAC circuit that needs to be monitored. When power is interrupted for three to eight consecutive minutes, sensor outputs a contact closure.

Current Sensor, 0 to 150 Amp AC (Discrete)
D-SENSR-12013.00001
AC current sensor with signal conditioner. Outputs a normally-closed relay. Provides electrical isolation between the output of the sensor and the current carrying conductor. Ideal for conveyors, lighting circuits, and electric heaters. Self-powered.