9783

NetGuardian 216 G3: Ordering Options

NetGuardian 216 SMS
The NetGuardian 216 SMS provides exactly the right capacity to manage your small sites and reports alarms wirelessly using GSM or CDMA.
Ordering Options - Download PDF
Serial port OR POTS 33.6 modem OR 202
Dual -48 VDC power inputs OR -24 VDC power input OR +24 VDC power input OR +12 VDC power input
8 (4 general, 2 battery, 1 internal temp., and 1 external temp.) OR 2 analog inputs
4 pin WAGO (Dual Feed) power connector
Real Time Clock
Event logging capability (added RAM)
Industrial temperature (-22 to 158 F | -30 to 70 C)
Accessories
110 VAC wall transformer (9 VDC Power Output)
220 VAC (UK Standard) wall transformer (9 VDC Power Output)
External temperature probe with 7-foot lead (D-PR-998-10A-07)

Discrete and Analog Sensors

Discrete and Analog Sensors

Fuel tanks, battery power, lighting systems, and water levels are just some of things you need to monitor to keep your network up and running. Track changing network conditions with these discrete & analog sensors.

NetGuardian 216 Wire-Wrap Back Panel

Wire-Wrap Back Panel

The NetGuardian 216's Wire-Wrap back panel allows for wire-wrap connections for the discrete alarms,
analog alarms, and control relays. (D-PK-WWADP-12001.00001)

NetGuardian 216 Pluggable Back Panel

Pluggable Back Panel

The NetGuardian 216's pluggable back panel allows for screw-in barrier plug connections for your alarms and control relays.
(D-PK-16PAN)

NetGuardian 216 Wall Mount Pluggable Panel

Wall Mount Pluggable Panel

The Wall Mount Pluggable Panel mounts below the NetGuardian 216 and other DPS products to allow for convenient termination access to discrete alarms, control relays, analog inputs, and fuse alarms. This pluggable panel is ideal for uses where the NetGuardian 216 RTU is mounted on a backboard.
(D-PK-16PAN-12002)

66 block

66 Block

A 66 block is a simple way to use wire-wrap connections with DPS RTUs. When telcos really want connections to stay in place, they use wire wrap. You'll simply punch down your alarm, analog, and/or control relay wiring to the 66 block, then connect the 66 block to the RTU using a standard amphenol cable (also available from DPS).

Test Equipment

NetGuardian 216 Test Box

The NetGuardian Test Box allows technicians to verify every discrete alarm input, control relay, and voltage-based analog alarm input on a NetGuardian 216, 216T, or 216F. The NetGuardian Test Box is a trusted tool of DPS test technicians.

Rack Ear

19" Long Rack Ear

Long mounting bracket used to secure the other side of the NetGuardian 216 G3 to a 19" rack. This ear is to be used in conjunction with the short ear that come standard with the unit.
(D-CS-325-10A-05)

Rack Ear

23" Long Rack Ear

Long mounting bracket used to secure the other side of the NetGuardian 216 G3 to a 23" rack. This ear is to be used in conjunction with the short ear that comes standard with the unit.
(D-CS-325-10A-07)

Power Supply

External 110VAC Wall Transformer

The external 110VAC wall transformer converts commercial power to the DC power and termination required for your RTU. It is able to handle 110/220 VAC and depending on the build option, this wall transformer will need to be equipped with a WAGO, standard RIA, locking RIA, or standard barrel terminal end.
Additional Voltage Options: 110/220 VAC to -48/-24/+24 VDC

Pluggable Back Panel

Pluggable Back Panel
The 216/V16 hinged pluggable back panel allows for pluggable connections to your NetGuardian's alarms, analog inputs, and control relays.

Wire Wrap Back Panel

Wire Wrap Back Panel
The 216/V16 wire wrap back panel allows for wire-wrap connections to your NetGuardian's alarms, analog inputs, and control relays.

Wall Mount Pluggable Panel

Wall Mount Back Panel
The Wall Mount pluggable panel mounts below the unit to allow for convenient pluggable alarm termination when the NetGuardian is mounted on a wall. Provides pluggable connectors to your NetGuardian's alarms, analog inputs, and control relays.

66 Block

66 Block
The 66 Block provides punchdown termination for the NetGuardian's alarms, analog inputs, and control relays.


Get a Custom Application Diagram of Your Perfect-Fit Monitoring System

There is no other network on the planet that is exactly like yours. For that reason, you need to build a monitoring system that's the right fit for you.

"Buying more than you need" and "buying less than you need" are real risks. You also have to think about training, tech support, and upgrade availability.

Send me a quick online message about what you're trying to accomplish. I'll work with you to build a custom PDF application diagram that's a perfect fit for your network.


Make an Informed Decision


Your network isn't off-the-shelf.

Your monitoring system shouldn't be, either.

Customized monitoring application drawing

We'll walk you through this with a customized monitoring diagram.

Just tell us what you're trying to accomplish with remote monitoring.

Get a Custom Diagram