Check out our White Paper Series!
A complete library of helpful advice and survival guides for every aspect of system monitoring and control.
1-800-693-0351
Have a specific question? Ask our team of expert engineers and get a specific answer!
Sign up for the next DPS Factory Training!
Whether you're new to our equipment or you've used it for years, DPS factory training is the best way to get more from your monitoring.
Reserve Your Seat TodayWhy the Right Master Station for Your SCADA System Is Critical for Your Bottom Line
Some people are born without the ability to feel pain. At first glance, these people may seem lucky - after all, who likes pain? However, this can result in serious danger. Just like someone burning themselves experiences harm to their body, your network suffers if you can't see what demands attention. Without a successfulSCADA (Supervisory Control and Data Acquisition) system , a widespread physical network is like a body...
Andrew Erickson
May 23, 2019
The Importance of RTUs in Substations for Effective Remote Monitoring and Control
In a treeless field outside of town, surrounded by a tall chain-link fence, a substation hums with electricity. It transforms voltage into power that fuels computers to connect us, streetlights to keep us safe, and hospital equipment for miles around. There's no one nearby; the only sound is the wind. However, the substation is still being monitored. Those in charge know exactly what is going on...
Andrew Erickson
May 21, 2019
Top 6 Techniques for UPS Monitoring
An Uninterruptible Power Supply, also known as a UPS, is a backup power source that activates when the main source of power fails. Although complex, a UPS has a very simple overall design. Every UPS has power inputs...
Morgana Siggins
May 17, 2019
Top 5 Factors for Choosing the Right PDU
A PDU - short for Power Distribution Unit - is a device that allows you to remotely turn on, turn off, and reboot gear running on AC or DC power. This means that a PDU is a device used to control and distribute the...
Morgana Siggins
May 16, 2019
Top 3 Problems with PLCs
When planning your SCADA system, the first step is to choose what kind of device will handle the monitoring of your alarms at your sites. For numerous reasons, this is a crucial decision, so it's important...
Andrew Erickson
May 10, 2019
DNP3: Pros & Cons
Are you researching the best practices for remote monitoring at your sites? Or are you working toward migrating legacy gear? No matter what, if you're considering the purchase of DNP3 equipment, it's important to...
Andrew Erickson
May 10, 2019
Cheapest Sensor Options for Your Remote Sites
An important aspect of using RTUs (remote telemetry units) for monitoring is the collecting and reporting of data from your remote sites. Your monitoring system needs a way to collect this data and report it to you via...
Andrew Erickson
May 3, 2019
What Are the Hidden Costs of Remote Monitoring Equipment?
Setting your network up for remote monitoring can be a very expensive task. However, what some people forget is that it's an investment. It might not affect your revenue directly, but your monitoring system will...
Andrew Erickson
May 2, 2019
RTUs vs PLCs: The Top Three RTU Problems You Need to Know About
If you want to start the process of implementing a remote monitoring or SCADA system in your network, then you're probably wondering if you should use an RTU or a PLC. You might be more inclined to choose an RTU if you...
Andrew Erickson
April 26, 2019
Buying Remote Monitoring: Q&A For Possible Vendors
Buying a remote monitoring system is a substantial investment of both your company's budget and the credibility of the individual recommending the purchasing - you. Of course, you want to have peace of mind when you...
Andrew Erickson
April 26, 2019
